Windows 7 Final retail version (High Compresed)

windows 7 which is compressed to 9MB and I upload in ziddu support for high-snail Internet

please be downloaded at

Here

Read More >>

INSTALL WINDOWS 7 USING FLASHDISK

Install windows 7 or Vista Install using the flash is very easy to do. Many laptop or notebook with an optical cd room easily damaged or cd room with a weak optical.understanding here is not only optical netbook just do not even have a cd room but we can replace both the operating system Linux, windows xp, vista or windows 7 by using the flash as medianya.untuk install linux with flash or how to install windows xp via flash while to install vista or windows 7 via the flash can be performed with several commands,
How to install Windows 7 or Windows Vista as follows:
Required / Requirements:
* USB Flash Drive / flahsdisk (Minimum 4GB)
* Vista installation files or windows 7
* Computer or laptop already installed windows vista
1. install flash on your pc
2. open a command prompt (in Vista), click -> start menu => Run then typing cmd and hit enter
3. typing the following commands in sequence
• DISKPART
• SELECT DISK 1
• CLEAN
• CREATE PARTITION PRIMARY
• SELECT PARTITION 1
• ACTIVE
• FORMAT FS = NTFS (Wait until the formatting is complete)
• ASSIGN
• EXIT
Do not close the command prompt window, after the command input is complete Vista installation DVD, or if you have the ISO file you can create a virtual drive using an application like Nero Image Drive or daemontools this way, more quickly and efficiently.
Open or maksimize commandpromt earlier, this time we assume that your DVD drive is on drive E: \ whereas the location of your flash is on Drive H: \
Enter the following command at the command prompt window that was the beginning we use
E: BOOT CD and enter
Remember because the drive E: \ is the DVD drive. (Adjust the location of your DVD Drive),
then type the following command:
BOOT CD and then enter,
then type the following command
Bootsect.exe / NT60 H:
then enter, remember, Drive H: \ is the location of your USB, adjust the location of your USB.
After all process is finished …
Now you just copy – paste all the files in the USB flash drive into your DVD.
if the process from beginning to the last is done properly it is time to install windows vista or windows 7 using the flash.
Restart your computer, then enter the bios (basic input output system) and then on the first boot select your flash as firstboot. and do installas install vista or windows 7 as usual.
So … Hopefully Helpful!

==================================================================================

4. insert the installer DVD into the DVD Rom. Or extract the contents of the installer ISO file to a folder, eg c: \ Win7
5. reopen the command prompt window
6. type the command: xcopy f: *.* / s / e / f g:
(Where f: is a DVD Rom drive, and g: is the location of the flash drive)
If the installer it from an ISO file, the command is replaced: xcopy c: \ Win7 \ *.* / s / e / fg:
(Where c: \ Win7 is the folder where you extract the ISO file)
7. wait until the process is complete .. copy files after the flash is ready for use
8. plug the stick into the netbook / laptop / pc will be installed. Make sure they will boot from the flash (if not, go into the BIOS settings, change the first boot priority order from a USB flash)
9. Furthermore, just follow the installation instructions on the screen

Read More >>

10 STEPS TO INSTALL XP FLASHDISK

Must Prepared:
1. A computer equipped with an optical drive (CD or DVD) and USB ports that can work well.
2. A USB flash disk capacity of 1 or 2 GB.
3. Windows XP installation CD.
4. Application installation module maker (USB_PREP8 and PEtoUSB) which can be downloaded free of charge GOES HERE
5. Prayer and courage!
Preparation Steps : 1. Plug in a USB flash disk into any USB port. Remember the drive position. Is F:, G:, H:, and so forth.

2. When you are in normal position (desktop), insert the Windows XP installation CD into the optical drive. If the computer running the installation process automatically, cancel it and close all applications being run.

3. Download and extract the application that the author gave. Advice writer, extract the entire contents to a folder, like C: \ USB.

4. Next, open the folder where you extract the application modules installation maker, this time we take the example C: \ USB.

5. Run the file named “usb_prep8.bat” then the screen will appear the Command Prompt window contains a variety of commands. If it appears the words “Press any key to continue,” press any key to confirm.

6. In the display window will appear asking you to format PEtoUSB USB flash disk. No need to change any settings, just click Start to begin the process of formatting. Answer the confirmation for your needs.

7. When finished, close the window PEtoUSB (do not close the Command Prompt window that was open when you run usb_prep8.bat), then the screen will display the options of 0 to 5.

8. Use option 1 to select the source installation files will be copied to flash disk. Here, specify the drive where you saved the installation of Windows XP. Just select the optical drive where the existing Windows XP CD in it, or select a folder of your choice if you have copied the Windows XP installation files to a specific folder.

9. Select option 3 to determine where you are striking the flash disk. If you are in the flash disk drive F:, then type F and press ENTER. If the drive G: then type G and press ENTER, and so on apply to other drives.

10. Then select option 4 to start the installation process modules that will be copied to flash disk automatically. Answer any confirmation that comes with Y or YES or OK or other forms of approval.

Done! Now you’re ready to flash disk used to install Windows XP! Please do the settings in your BIOS subnotebook, and select the Removeable Disk (or any other name) as the first medium that is executed when booting.

Given this kind of installation techniques are also available on the internet, you also can find it via search engines. Good luck …!

Read More >>